Handleiding
Je bekijkt pagina 77 van 133
Network Settings
User Guide 73
RA(Stateless)
When the RA(Stateless) is set to On and the network infra-structure provides the
IPv6 address prefix in the Router Advertise information, the IPv6 stateless address
will be generated on the machine.
DHCPv6 (Stateful)
When the DHCPv6(Stateful) is set to On and the network infra-structure provides
the “Managed address configuration”, the IPv6 stateful address (128-bit length) will
be assigned to the machine by DHCPv6 server.
Domain Name
Specify the domain name of the domain to which the machine belongs.
Note: This setting is enabled when DHCPv6 (Stateful) is set to Off.
DNS Server (Primary, Secondary)
Specifies the IP addresses of the primary and secondary DNS (Domain Name Sys-
tem) servers. When DHCP/BOOTP is turned On and Use DNS Server from DHCP
is selected, you can select to use the DNS server obtained via DHCP. When DHCP/
BOOTP is turned On and Use following DNS Server is selected, you can enter
static DNS server information in the Primary and Secondary fields provided.
DNS Search Suffix (Primary, Secondary)
Specifies the primary and secondary DNS (Domain Name System) search suffix.
When DHCP/BOOTP is turned On, you can select DNS Search Suffix (Primary) or
Use following DNS Search Suffix. When DHCP/BOOTP is turned On and Use
following DNS Search Suffix is selected, you can enter static DNS search suffix in
the Primary and Secondary fields provided.
DNS over TLS
Select Auto from the drop-down list to automatically configure DNS over TLS.
Select On to communicate using DNS over TLS. Select Off to communicate without
using DNS over TLS.
Certificate Auto Verification
Select Validity Period, Server Identity, Chain or Revocation as the method to
confirm the validity of certificate obtained from the server. You can use more than
one option at a time.
Revocation Check Type
Select OSCP, CRL, or CRL & OSCP as the method to confirm the revocation of dig-
ital certificate.
Hash
Select a Hash algorithm of either SHA1 or SHA2(256/384). You can use more than
one algorithm at a time.
3. Click Submit button.
IPv6 Settings (Wireless Network)
1. Click TCP/IP under Network Settings on the navigation menu. The Network Settings
: TCP/IP page opens.
Bekijk gratis de handleiding van UTAX 5009ci, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UTAX |
| Model | 5009ci |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 11339 MB |
