USL LSS-100P handleiding
Handleiding
Je bekijkt pagina 10 van 32
LSS−100P Installation & Operation Manual
v160318 10
Figure 7 - LSS-100P Web Configuration
15. Enter the host name (NET BIOS host name), IP address, gateway, subnet mask, and DNS
information. DNS is used if the NTP server or web services server (log posting in command
scripts, CP850 test, etc.) is specified by a host name instead of an IP address. If IP addresses are
used instead of host names, these fields can be left at 0.0.0.0. The default 8.8.8.8 is a DNS
service provided by Google. After the network information has been entered, click the “Save
Config” button to save the settings. Note that the new IP address takes effect immediately, so it
will be necessary to address the LSS-100P at its new address and will probably be necessary to
change the laptop computer’s IP address to an address on the same subnet.
16. Click the NTP Configuration link at the top of the page.
Figure 8 - LSS-100P NTP Configuration
Bekijk gratis de handleiding van USL LSS-100P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | USL |
| Model | LSS-100P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6311 MB |
