Unold 86715 handleiding
Handleiding
Je bekijkt pagina 20 van 72
20 von 72
Stand 23.2.2024
DE
EN
FR
NL
IT
ES
PL
4. Check whether all required parts listed in this manual have been shipped
with your appliance. Notice: If it is still fitted on the axle, you can remove
the fabric tube as it merely serves as protection during transport.
5. Loosen the attachment screw and nut from the top of the tube.
6. Remove the screw of the base fastener from the bottom of the tube.
7. Insert the tube into the recess at the top of the base and turn both over while
holding these parts in place to gain access to the bottom.
8. Align the screw of the base fastener as shown in the opening of the base.
Tighten the screw to attach the base to the fan housing.
9. Now, turn the base with the stand pipe over again and place the base on a
flat, and stable surface.
10. Remove locking screw No. 3 from the motor unit. Next, place the motor unit
on the tube, making sure the openings on the hinge bracket are aligned with
the slots on the tube:
Copyright UNOLD AG | www.unold.de
Bekijk gratis de handleiding van Unold 86715, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Unold |
| Model | 86715 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 13439 MB |
