UniView IPC815SB-ADF14K-I0 handleiding
Handleiding
Je bekijkt pagina 50 van 135
45
(1) Use to move the camera to the desired upper tilt limit position.
(2) Click above the rectangle to set the position as the upper tilt limit.
(3) Use to move the camera to the desired lower tilt limit position.
(4) Click below the rectangle to set the position as the lower tilt limit.
Item Description
Rotate the camera to the limit.
Delete the limit.
Click Save.
5.4.4 Remote PTZ Control
Remote PTZ control is required when the camera is added to a third-party platform and the PTZ protocol
does not match.
Go to Setup > PTZ > Remote Control.
Enable Remote Control and complete the settings.
Item Description
Listener Port
Local port number of the camera. Make sure that the port number you entered is not in use. In
general, it’s recommended to keep the default value.
Address Code
The address code in the command must be the same as the address code configured on the
camera, so that the camera can parse the command.
Bekijk gratis de handleiding van UniView IPC815SB-ADF14K-I0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UniView |
| Model | IPC815SB-ADF14K-I0 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 34525 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 360 g |
| Hoogte | 43.7 mm |
| Soort | IP-beveiligingscamera |
| Internationale veiligheidscode (IP) | IP66 |
