UniView IPC675LFW-AX4DUPKC-VG Handleiding (135 Pagina's)

Handleiding

106

CAUTION!

•

Strictly follow the instructions below when powering on external alarm devices (e.g., alarm light) to

avoid device damage.

•

Check that Alarm Type is set to Normally Open (default) on the camera. Make sure the camera

and the external alarm device are disconnected from power.

•

After you connect the alarm device to the camera, connect the alarm device to power first, and

then connect the camera to power.

5.7.2 One-key Disarming

The camera cannot trigger linked actions when disarmed.

Go to Setup > Events > One-key Disarming.

Choose a disarming mode.

 Disarm by Schedule: Disarm according to a weekly schedule.

 Disarm Once: Disarm during a specified time period.

Configure disarming schedule or time according to the disarming mode you chose. The disarming

schedule or time applies to all the actions selected.

 Disarm by schedule: Click to configure disarming time.

 Disarm Once: Set the disarming time.

Choose actions to be disarmed. The actual actions available, for example, for example, alarm light,

alarm sound, email, alarm output, may vary with camera model and version.

Click Save.

5.8

Storage

Go to Setup > Storage > Storage.

Bekijk gratis de handleiding van UniView IPC675LFW-AX4DUPKC-VG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.