UniView IPC6622SR-X25-VF handleiding
Handleiding
Je bekijkt pagina 134 van 135
129
CAUTION!
Restarti
ng the camera will interrupt the ongoing service.
Click Restart and then confirm to restart the device. You may set a schedule to reboot the camera
automatically at the set time.
Heater
Use the heater to eliminate water droplets on the lens in a high humidity environment.
(1) Enable Heater.
(2) Set Remaining Heating Time.
2. Network Diagnosis
Go to Setup > System > Maintenance > Network Diagnosis.
Select NIC
NIC1 is the camera’s IP address.
IP/port filter
All: Capture all packets of the camera.
Specify: Capture packets of the specified port or IP.
Filter: Filter packets of the specified port or IP and capture other packets.
Custom Rules
Select Custom Rules and set the rules.
Click Start Capture to start capturing packets. After packet capture is finished, save data and view the
diagnosis.
Test network delay and packet loss rate
Test network connectivity by sending test packets to a test address.
Test Address: Must be a valid IP address or domain name.
Packet Size (Bytes): Size of test packets to be sent. Range: [64-65507]. Sometimes a high delay
may be caused by a large packet size. If the test failed, set a smaller packet size and then try
again.
Bekijk gratis de handleiding van UniView IPC6622SR-X25-VF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UniView |
| Model | IPC6622SR-X25-VF |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 34525 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 5280 g |
| Hoogte | 384.8 mm |
| Soort | IP-beveiligingscamera |
| Internationale veiligheidscode (IP) | IP66 |
