UniView IPC3638SE-ADF40K-WL-I0 handleiding

Bewakingscamera

UniView

135 pagina's

PDF beschikbaar

Handleiding

Slow Shutter

Increase image brightness in low light conditions.

NOTE!

This parameter is configurable when Exposure Mode is not set to Iris Priority and Image

Stabilization is disabled.

Slowest Shutter Set the slowest shutter speed for exposure.

Compensation

Adjust the compensation value as required to achieve the desired image effect.

NOTE!

This parameter is configurable when Exposure Mode is not set to Manual.

Restore Auto

Exposure(min)

Set the duration for the camera to restore automatic exposure mode.

Metering

Control

Set how the camera measures the intensity of light.

 Center-Weighted Average Metering: Measure light mainly in the central part of the image.

 Evaluative Metering: Measure light in the specified area of the image.

 Spot Metering: Similar to evaluative metering. But it cannot increase the brightness of images.

 Face Metering: Adjust image quality in poor lighting conditions by controlling the brightness of

captured faces in face scenes.

NOTE!

This parameter is configurable when Exposure Mode is not set to Manual.

Day/Night

Mode

 Automatic: The camera automatically switches between day mode and night mode according

to the ambient lighting condition to output optimum images.

 Day: The camera outputs high-quality images in daylight conditions.

 Night: The camera outputs high-quality images in low-light conditions.

 Input Boolean: The camera switches between day mode and night mode according to the

Boolean value input from a connected third-party device.

NOTE!

The Input Boolean option is only available on certain models.

Day/Night

Sensitivity

Light threshold for switching between day mode and night mode. A higher sensitivity value

means that the camera is more sensitive to the change of light and is therefore more easily to

switch between day mode and night mode.

NOTE!

This parameter is configurable when Day/Night Mode is set to Automatic.

Day/Night

Switching(s)

Set the length of time before the camera switches between day mode and night mode after the

switching conditions are met.

NOTE!

This parameter is configurable when Day/Night Mode is set to Automatic.

WDR

Enable WDR to ensure clear images in high contrast conditions.

NOTE!

This parameter is configurable when Exposure Mode is set to Automatic, Custom, Shutter

Priority, Indoor 50Hz or Indoor 60Hz and when Image Stabilization and Defog are disabled.

WDR Level

Adjust the WDR level.

NOTE!

Level 7 or higher is recommended if there is a high contrast between the bright and dark areas in

the scene. In the case of low contrast, it is recommended to disable WDR or use level 1 to 6.

WDR On/Off

Sensitivity

When

WDR

is set to

Automatic

, adjust the parameter to change the WDR switching sensitivity.

Suppress WDR

Stripes

When enabled, the camera automatically adjusts the slow shutter frequency according to the light

frequency to minimize stripes in the image.

To restore defaults, click Default.

4. Smart Illumination

On the Image page, click Smart Illumination.

Bekijk gratis de handleiding van UniView IPC3638SE-ADF40K-WL-I0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.