UniView IPC3638SE-ADF40K-WL-I0 Handleiding (135 Pagina's)

Handleiding

34

At present, QoS allows you to assign different priority to audio and video, alarm report, configuration

management and FTP transmission. The greater the value, the higher the priority.

As shown in the figure above, the audio & video service takes priority over all other services in case of

network congestion.

NOTE!

To use QoS, make sure that the router or switch is also configured with QoS.

Click Save.

5.2.10 WebSocket

WebSocket allows you to manage your camera on a third-party platform, such as device version and

capability information acquisition, PTZ control, alarm reporting, etc.

Go to Setup > Network > WebSocket.

Set the parameters.

Item Description

WebSocket Select to enable or disable WebSocket.

Destination IP Enter the IP address of the third-party platform.

Destination

Port

Enter the listener port of the third-party platform.

Device ID The default device ID is the device’s serial number. You can set a device ID as needed.

Authentication

Key

Enter the authentication key used to connect the camera to a third-party platform. Make sure the

authentication key configured on the camera and the third-party platform is the same.

Confirm

Authentication

Key

Confirm the authentication key you entered by entering it again.

Online Status Check whether the device is successfully connected to the third-party platform.

Click Save.

5.3

Video & Audio

For dual-channel devices, you can set video and audio parameters for the channels separately.

Bekijk gratis de handleiding van UniView IPC3638SE-ADF40K-WL-I0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.