UniView IPC2228SE-DF40K-WL-I0 Handleiding (135 Pagina's)

Handleiding

72

Select Leave Area and click to configure it.

Add a detection rule.

(1) Click to add a detection area. The detection area is a hexagon by default. Up to 4 detection

rules are allowed.

(2) Adjust the position and size of the area or draw an area as needed.

 Adjust the position and size of the area.

 Point to a border of the area and drag it to the desired position.

 Point to a handle of the area and drag to resize it.

 Draw an area.

Click on the image and drag to draw a line. Repeat the action to draw more lines to form an

enclosed shape as needed. Up to 6 lines are allowed.

Set the detection rule.

Item Description

Sensitivity

Set the detection sensitivity.

The higher the sensitivity, the more likely cross line behaviors will be detected, and the more

likely false alarms will occur.

Level

Select the priority of the detection rule, including High, Medium, and Low.

The camera detects the rule that is triggered first by default. If multiple rules are triggered at

the same time, the camera detects the rule with higher priority.

Detection Object

Select the object to be detected, including

Motor Vehicle

,

Non-Motor Vehicle

, and

Pedestrian

.

Bekijk gratis de handleiding van UniView IPC2228SE-DF40K-WL-I0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.