UniView IPC2228SE-DF40K-WL-I0 Handleiding (135 Pagina's)

Handleiding

57

Aperture

Control

Select automatic or manual iris control.

NOTE!

This parameter is configurable when Lens Type is P-IRIS.

F-Number Set the f-number to adjust the iris opening manually.

Use

Recommended

Value

The camera optimizes the iris opening based on the current lighting conditions.

To restore defaults, click Default.

9. Dewarping

Dewarping is used to correct distorted images caused by wide-angle lenses.

On the Image page, click Advanced.

Enable Dewarping and set the dewarping level as needed.

To restore defaults, click Default.

10. Image Stabilization

A camera mounted outdoors may be shaken by external forces (e.g., wind), causing image blur. In this

case, you can enable image stabilization to ensure the image quality.

On the Image page, click Advanced.

Select On or Off to enable or disable image stabilization.

To restore defaults, click Default.

11. Fusion Mode

In fusion mode, the object details on the visible image are overlayed on the thermal image, so that you

can see the object details on the thermal image as well.

On the Image page, select Channel 2 and click Fusion Mode.

Select On to enable fusion mode.

Set the fusion percentage.

Item Description

Image Fusion

Percentage

The greater the value, the closer the thermal image effect is to the visible image effect.

Image fusion percentage: 0 Image fusion percentage: 100

Edge fusion percentage: 50 Edge fusion percentage: 50

Bekijk gratis de handleiding van UniView IPC2228SE-DF40K-WL-I0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.