UniView IPC2228SE-DF40K-WL-I0 Handleiding (135 Pagina's)

Handleiding

25

 IPv6

 DHCP

By default, the IPv6 mode is set to DHCP. The IP address is automatically obtained from the DHCP

server.

 Manual

(1) Set the IPv6 mode to Manual.

(2) Enter the IPv6 address, prefix length and default gateway. Make sure that the IPv6 address is

unique in the network.

Set the MTU value, port type and operating mode.

 MTU: Set the maximum packet size supported by the network in bytes. The greater the value, the

higher the communication efficiency, the higher the transmission delay.

 Port Type: FE Port by default.

 Operating Mode: Auto-negotiation by default.

Click Save.

5.2.2 Port

1. Port

Go to Setup > Network > Port.

Bekijk gratis de handleiding van UniView IPC2228SE-DF40K-WL-I0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.