UniView IPC2228SE-DF40K-WL-I0 Handleiding (135 Pagina's)

Handleiding

100

(2) Edit detection areas as needed.

 Click or drag on grid areas to erase grids.

 Click or drag on blank areas to draw grids.

(3) Drag the slider to adjust detection sensitivity.

The higher the sensitivity level, the higher the detection rate of small motions, and the higher the

false alarm rate. Set based on the scene and your actual needs.

(4) Set Suppress Alarm to avoid receiving the same alarms within a certain length of time (alarm

suppression time). For example, alarm suppression time is set to 5s, after an alarm is reported:

 If no motion is detected within the next 5s, new alarms can be reported after 5s when the alarm

suppression time is over.

 If motion is detected within the next 5s, the alarm suppression time recounts from the time of

the last alarm, and new alarms can be reported when the alarm suppression time (5s) is over.

Set alarm linkage and an arming schedule. See Alarm-triggered Actions and Arming Schedule for

details.

Click Save.

2. Tampering Detection

The camera triggers a tampering alarm after the lens is blocked for a certain length of time.

Go to Setup > Events > Common Alarm > Tampering Detection.

Select Enable Tampering Detection.

Set detection rules.

(1) Drag the slider to adjust detection sensitivity. The higher the sensitivity level, the higher the

detection rate, and the higher the false alarm rate. Set based on the scene and your actual needs.

(2) Set the duration of lens blocking. The camera reports an alarm when the duration of lens blocking

exceeds the set value. Set based on the scene and your actual needs.

Bekijk gratis de handleiding van UniView IPC2228SE-DF40K-WL-I0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.