United Office UAV 300 A1 handleiding
Handleiding
Je bekijkt pagina 11 van 198
■ 8
│
GB
│
IE
UAV 300 A1
Assembly
WARNING!
► Do not connect the appliance to a power socket during assembly.
► The cutting blades in the cutter attachment 6 of the appliance are very
sharp. Take extreme care when assembling the appliance.
♦ Place the small waste collector
0 in the large waste collector w. To do this,
push the small waste collector 0 down along the guide rails in the large
waste collector bin w until it is fully engaged (see fig. 1).
Fig. 1 Fig. 2
♦ Hold the cutter attachment 6 by the two integrated carrying recesses 8
and position it over the large waste collector w so that the power cable 1
points backwards and the viewing window q in the large waste collector w
points forwards (see fig. 2).
NOTE
► The cutter attachment
6 must sit upright and firmly on the large waste collec-
torw. Otherwise, the appliance will not start!
► The appliance cannot be used until the cutting attachment 6 is correctly
seated on the large waste collectorw and the safety switch 7 deactivated.
First use
NOTE
► Make sure the REV/OFF/AUTO/FWD switch 3 is in the OFF position
before plugging the appliance into the power socket.
► Every shredder is tested for functionality after manufacture. It is possible that
you may find paper residue in the cutting blades.
♦ Insert the plug
1 into a mains power socket.
Bekijk gratis de handleiding van United Office UAV 300 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | United Office |
| Model | UAV 300 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14820 MB |
