Uniprodo UNI_WATER_28 handleiding
Handleiding
Je bekijkt pagina 9 van 78
EN
Legend
The product satisfies the relevant safety standards.
Read instructions before use.
The product must be recycled.
WARNING!
or
CAUTION!
or
REMEMBER!
Applicable to the given situation.
(general warning sign)
ATTENTION! Electric shock warning!
Class II protection device with double insulation.
PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may
differ from the actual product.
2. Usage safety
ATTENTION!
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury or even death.
The terms "device" or "product" are used in the warnings and instructions to refer to:
Water spillway
2.1. Electrical safety
Applies to the power supply
a) The plug must fit the socket. Do not modify the plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Do not touch the device with wet or damp hands.
c) Use the cable only for its designated use. Never use it to carry the device or to pull the plug out of a
socket. Keep the cable away from heat sources, oil, sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
d) If working with the device outdoors, make sure to use an extension cord suitable for outdoor use.
Using an extension cord suitable for outdoor use reduces the risk of electric shock.
e) If using the device in a damp environment cannot be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of electric shock.
2.2. Safety in the workplace
a) Make sure the workplace is clean and well lit. A messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use common sense when working with the device.
b) If you discover damage or irregular operation, immediately switch the device off and report it to a
supervisor without delay.
c) If there are any doubts as to the correct operation of the device, contact the manufacturer's support
service.
d) Only the manufacturer's service point may repair the device. Do not attempt any repairs
independently!
e) In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one intended for use on live
electrical devices) to put it out.
f) Regularly inspect the condition of the safety labels. If the labels are illegible, they must be replaced.
g) Please keep this manual available for future reference. If this device is passed on to a third party, the
manual must be passed on with it.
Bekijk gratis de handleiding van Uniprodo UNI_WATER_28, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Uniprodo |
| Model | UNI_WATER_28 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14000 MB |
