Uniprodo UNI_MW_01 handleiding
Handleiding
Je bekijkt pagina 19 van 147
EN
B. Barrel frame
C. Handle
D. Folding bucket
E. Drain
F. Base
G. Knob
H. Bucket bottom
I. Pulsator
3.2. Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative
humidity should be less than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 10 cm distance between each
side of the device and the wall or other objects. The device should always be used
when positioned on an even, stable, clean, fireproof and dry surface, and be out
of the reach of children and persons with limited mental and sensory functions.
Position the device such that you always have access to the power plug. The
power cord connected to the appliance must be properly grounded and
correspond to the technical details on the product label.
Disassemble the device and all its components and clean them before the first
use.
Water Intel
Please pour clean water into the tub of washing machine directly and the water
level can not exceed the highest water level “H”.
Power Line Connection
Power electric voltage and rate must be consistent with the data plate on the
machine.
Please follow below steps when removing washing machine connection:
a) Disconnect the power and socket
b) Drain off water in the tub
c) Wipe the washing machine and keep it clean
Unfolding
a) Take out the lid
b) Lift the handle with one hand
c) Hold the bottom of the bucket with the other hand and pull the handle
upward
d) Complete the operation after fully expanding the folding bucket
Folding
Bekijk gratis de handleiding van Uniprodo UNI_MW_01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Uniprodo |
| Model | UNI_MW_01 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 18092 MB |