UNGO ProSecurity SR6000 handleiding
Handleiding
Je bekijkt pagina 32 van 57
29
© 2005 directed electronics, inc.
silent mode
To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press for less than one second before
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
panic mode
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your remote. Just press
for two seconds, and you will enter Panic Mode. The siren
will sound and the parking lights will flash for the programmed
siren duration. To stop Panic Mode at any time, press on
the remote again.
The LCD 2-way remote will beep (or vibrate) continuously
when the system enters panic mode. The 2-way remote will not
generate a page notification when panic mode is exited.
note: Once panic mode has been entered, the siren will
sound for the programmed duration.
➜
note: The Warn Away
®
response to lighter impacts is
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering. Only the Warn Away
®
response is bypassed.
➜
Bekijk gratis de handleiding van UNGO ProSecurity SR6000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity SR6000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4948 MB |
