UNGO ProSecurity SR6000 handleiding
Handleiding
Je bekijkt pagina 13 van 57
10
© 2005 directed electronics, inc.
Button
The LCD backlighting will turn on when pressed for less than one
second; when held for more than five seconds the transceiver will
enter adjustment mode allowing the setting of the clock, timer
mode, and audible melody selection. For more information, please
refer to the
Function Button Configurations
section of this guide.
Button
The remote start function of the system is controlled by pressing
this button for one second. To stop the remote start press this
button twice. Also, stepping on the brake pedal will cancel the
remote start.
Button
When pressed and held this button activates the second unlock
or other accessory.
and Buttons
When pressed simultaneously these buttons activate remote start
timer mode, engaging the remote start function every 24 hours.
, and Buttons
When pressed simultaneously these buttons display the internal
temperature of the vehicle on the LCD.
and Buttons
When pressed simultaneously with the system armed, the system
enters temperature auto start mode and automatically remote starts
the vehicle if the temperature inside the vehicle drops below
0 degrees Fahrenheit.
Bekijk gratis de handleiding van UNGO ProSecurity SR6000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity SR6000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4948 MB |
