UNGO ProSecurity SR5000 handleiding
Handleiding
Je bekijkt pagina 31 van 52
28
The status LED will light solidly if you are entering override
mode, and it will go out if you are exiting override mode.
The transceiver will not generate a page notification when
entering or exiting override mode using the override switch.
To enter or exit override mode using the transceiver:
1. Open any vehicle door.
2. Press .
3. Press .
4. Press again.
The status LED will light solidly if you are entering override
mode, and it will go out if you are exiting override mode. The
transceiver will generate alarm/disarm page notifications since
the observing buttons are used when entering and exiting over-
ride mode. The status LED is the only way to ensure the system
has entered/exited override mode.
remote engine start
This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the vehicle
with the climate control system. If interior heating or cooling is
desired, the climate controls must be preset, and the fan blower
must be set to the desired level prior to remote starting the vehicle.
➜
Bekijk gratis de handleiding van UNGO ProSecurity SR5000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity SR5000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3809 MB |
