UNGO ProSecurity SR1000 handleiding
Handleiding
Je bekijkt pagina 28 van 40
25
.
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1 Trunk Pin
2 Instant trigger - a heavier impact
detected by the shock sensor
3 Door switch trigger
4 Instant trigger - for optional
sensors
5 Ignition trigger
6 Hood Pin
interpreting zone diagnostics
Warning responses are not reported by arming or disarming diagnos-
tics. If you receive an open zone notification when arming or a previous
alarm notification when disarming, look at the LED. Active or triggered
zones will be indicated by a pattern of blinks by the LED.
Example
If zone 3 was active or triggered, the LED will blink three times with a
two-second pause. Then it will blink three times again, and repeat until
the ignition is turned on.
nnoottee::
Your system stores the last two triggered zones in mem-
ory. If your system has been triggered but the LED has been
reset by turning on the ignition, your dealer can still recall the
last two zones that were triggered. Contact your dealer for
details.
Bekijk gratis de handleiding van UNGO ProSecurity SR1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity SR1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2039 MB |
