UNGO ProSecurity SR1000 handleiding
Handleiding
Je bekijkt pagina 17 van 40
14
To disarm the security system,
turn the ignition to the ON posi-
tion. Press the override switch
the preset number of times (one
to five times) within 15 seconds.
After five seconds, the system
will disarm. If the system does
not disarm, you may have waited
too long; turn the ignition off
and on and try again.
Location of override switch _________________________________
Number of Presses _____________________________________
silent mode
To temporarily turn off the arm or disarm chirps, use silent arm/disarm.
Simply press for less than one second before arming or disarming,
and the confirmation chirp(s) will be eliminated for that one operation
only. If you want the arm/disarm chirps turned off permanently, your
dealer can do this for you.
nnoottee::
The warning response to lighter impacts is bypassed if
the system is armed using silent arm/disarm. This ensures
that no chirps will be emitted by the siren in an area you
want chirp-free. The system is still fully capable of triggering.
Only the warning response is bypassed.
iimmppoorrttaanntt!!
The override switch can be programmed to
respond to 1-5 presses for the disarm function. You must
check with the installer to verify the programming for your
individual unit.
DRW-35
Bekijk gratis de handleiding van UNGO ProSecurity SR1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity SR1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2039 MB |
