UNGO ProSecurity SR1000 handleiding
Handleiding
Je bekijkt pagina 15 van 40
12
arming while driving
Your security system can be armed while driving the vehicle! Simply
press on the remote for two seconds while the vehicle is running.
The siren will chirp once to indicate that the security system is armed,
and then once more to indicate that the ignition is on. The system will
not respond to any input except the door triggers, and the starter kill
relay (if installed) will not be activated. Once you have arrived at your
destination, the system will disarm when the ignition is turned off. The
siren will chirp twice and the LED will then stop flashing. The system
can also be disarmed at any time by pressing .
disarming
To disarm the security system, press . You will hear two chirps, and
the parking lights will flash twice. If the power locks are controlled by
the system, the doors will also unlock. The siren chirping either four or
five times when disarming indicates an occurrence of an alarm in your
absence, which is described in the Diagnostics Section of this guide.
nnoottee::
Multi-Level Security Arming only applies to a single
arming cycle. Once the system is disarmed and then re-
armed, all the zones will be active again.
Bekijk gratis de handleiding van UNGO ProSecurity SR1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity SR1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2039 MB |
