UNGO ProSecurity S670 handleiding
Handleiding
Je bekijkt pagina 29 van 39
26
© 2006 directed electronics, inc.
disarming diagnostics
Extra chirps that are heard when disarming the system are the
Tamper Alert. If four chirps are heard when disarming the
system, then the security system was triggered in your absence.
If five chirps are heard when disarming the system, a zone was
triggered so many times that the Nuisance Protection
®
Circuitry
has bypassed that zone. In either case, the status LED will indi-
cate which zone was involved (see
Table of Zones
section). The
security system will retain this information in its memory and
chirp four or five times each time it is disarmed, until the next
time that the ignition is turned on.
system status chirps
The siren will chirp when arming/disarming the system. The
pattern of chirps will audibly report the system’s status as
described below.
Action Number of Chirps Description
Arm 1 System armed
Arm 1 (3-second delay), 1 System armed with
Bypass Notification
Disarm 2 System disarmed
Disarm 4 System disarmed with
Tamper Alert
Disarm 5 System disarmed NPC
®
active
➜
➜
Bekijk gratis de handleiding van UNGO ProSecurity S670, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity S670 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3768 MB |
