UNGO ProSecurity S660 handleiding
Handleiding
Je bekijkt pagina 36 van 47
33
© 2005 directed electronics, inc.
table of zones
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input
assignments are listed in the following table, along with spaces to
write in any optional sensors or switches that have been installed.
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
11
Trunk Pin
22
Instant trigger - a heavier impact
detected by the shock sensor
33
Door switch trigger
44
Instant trigger - for optional
sensors
55
Ignition trigger
66
Hood Pin
interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming
diagnostics. If you receive a Bypass notification when arming or
a Tamper Alert notification when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of blinks
by the LED.
Example
If zone 3 was active or triggered, the LED will blink three times
with a two-second pause. Then it will blink three times again,
and repeat until the ignition is turned on.
➜
➜
Bekijk gratis de handleiding van UNGO ProSecurity S660, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity S660 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4121 MB |
