UNGO ProSecurity S660 handleiding
Handleiding
Je bekijkt pagina 29 van 47
26
© 2005 directed electronics, inc.
disarming without a remote
If your remote is lost or damaged, you can manually disarm your
vehicle security system. To disarm the system without a remote,
you must have the vehicle's ignition key and know where the
Valet
®
button is located. Be sure to check with your installer at
the time of installation for both the location and the preset
response (1-5 presses) of the Valet
®
button.
To disarm the security system,
turn the ignition to the ON posi-
tion. Press the Valet
®
button the
preset number of times (one to
five times) within 15 seconds.
After five seconds, the system will
disarm. If the system does not
disarm, you may have waited too
long; turn the ignition off and on
and try again.
Location of Valet
®
Button_________________________________
Number of Presses_____________________________________
important! The Valet
®
button can be programmed to
respond to 1-5 presses for the disarm function. You must
check with the installer to verify the programming for
your individual unit.
DRW-35
➜
Bekijk gratis de handleiding van UNGO ProSecurity S660, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity S660 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4121 MB |
