UNGO ProSecurity S660 handleiding
Handleiding
Je bekijkt pagina 25 van 47
22
© 2005 directed electronics, inc.
➤
DDoooorr TTrriiggggeerr
- If a door is opened the siren will chirp for three
seconds, then the siren will sound and the lights will flash for
the programmed duration and report Zone 3. The three
seconds allow the user time to disarm the system with a
minimum of noise should a door be opened inadvertently
while the system is armed.
➤
HHoooodd TTrriiggggeerr
- Opening the hood will sound the siren, flash
the lights for the programmed duration, and report Zone 1.
➤
TTrruunnkk TTrriiggggeerr
- Opening the trunk (if connected) will
instantly sound the siren and flash the lights for the
programmed duration and report Zone 4.
➤
IIggnniittiioonn TTrriiggggeerr
- If the ignition is turned on the siren will
chirp for three seconds, then the siren will sound and the lights
will flash for the programmed duration and report Zone 5.
When a Triggered Response is activated the transceiver will:
➤ Repeat four quick beeps (or vibrate) for 15 seconds.
➤ The full trigger alert icon (28) will turn on for 15 seconds.
➤ The zone icons will turn on and remain on until a transceiver
button is pressed, clearing the page alert.
➤ The transceiver will enter page recognition mode and
generate alarm page alerts.
note: Icons 13, 14, 16, and 20 represent alarm system
triggered sequence zone inputs. For more information
about icons and the zones they represent refer to the
Standard Remote Configurations
section.
Bekijk gratis de handleiding van UNGO ProSecurity S660, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity S660 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4121 MB |
