UNGO ProSecurity RK1 handleiding
Handleiding
Je bekijkt pagina 13 van 27
10
override mode
You can prevent your system from automatically activating the Starter
Kill and locking the doors by using override mode. This is very useful
when washing the vehicle or having it serviced. In override mode, the
starter kill cannot be activated, even with the remote, but all conve-
nience functions (door locks, remote engine start, etc.) will continue to
work normally.
To enter or exit override mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Override
switch within 10 seconds.
The status LED will light continuously if you are entering override mode
and will turn off if you are exiting override mode.
panic mode
If you are threatened in or near your vehicle, you can attract attention
by triggering the system with your remote. Just press for 1.5 sec-
onds to enter panic mode. In panic mode, the horn will honk and the
parking lights will flash for 30 seconds. To stop panic mode at any
time, press , or on the remote.
NNOOTTEE::
In order for panic mode to be effective, the vehicle’s horn (or
optional siren) as well as the vehicle's parking lights must be
connected.
DRW-35
Bekijk gratis de handleiding van UNGO ProSecurity RK1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity RK1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1307 MB |
