UNGO ProSecurity K20 handleiding
Handleiding
Je bekijkt pagina 18 van 19
15
© 2006 directed electronics, inc.
QQUUIICCKK RREEFFEERREENNCCEE GGUUIIDDEE
To lock/arm using your remote
➤ To arm the system press for one second. The doors will lock (if
connected). The LED will begin to flash. The Failsafe® Starter Kill will
prevent the vehicle’s starter from cranking if it has been installed. The vehi-
cle’s horn (if connected) will honk (in audible mode) and the parking lights
will flash once to confirm arming of the system.
To unlock/disarm using your remote
➤ To disarm the system press for one second. The doors will unlock (if
connected). The Failsafe
®
Starter Kill will be deactivated and the vehicle’s
horn (if connected) will honk twice (in audible mode) and the parking lights
will flash twice.
To enter or exit Valet
®
Mode
➤ Turn the ignition to the ON position. Turn the ignition back off. Press and
release the Valet
®
switch within 10 seconds. The status LED will light steadily
if you have entered Valet
®
Mode. To exit Valet
®
Mode, repeat the steps above.
The LED will turn off when exiting Valet
®
Mode.
To activate Panic Mode
➤ Press and hold for 2 seconds.
To exit Panic Mode
➤ Press on the transmitter.
Location of Valet Switch___________________________________
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂
✂
Bekijk gratis de handleiding van UNGO ProSecurity K20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity K20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1442 MB |
