UNGO ProSecurity K20 handleiding
Handleiding
Je bekijkt pagina 11 van 19
8
© 2006 directed electronics, inc.
To disarm the security system,
turn the ignition to the ON posi-
tion. Press and release the Valet
switch within 10 seconds. The
status LED will stop flashing and
the vehicle should start. If the
vehicle does not start, you may
have waited too long; turn the
ignition off and repeat the process.
Location of Valet Button_________________________________
audible mode
To temporarily turn on the arm or disarm horn honk(s), simply
press for less than one second before arming or disarming,
and the confirmation honk(s) will be present for that one opera-
tion only.
valet mode
You can prevent your system from automatically activating the
Failsafe
®
Starter Kill (optional, not included) and locking the
doors by using Valet
®
Mode. This is very useful when washing the
vehicle or having it serviced. In Valet
®
Mode, the starter kill
cannot be activated, even with the transmitter, but all conve-
nience functions (door locks, trunk release, etc.) will continue to
work normally.
To enter or exit Valet
®
Mode:
➜
➜
DRW-35
Bekijk gratis de handleiding van UNGO ProSecurity K20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UNGO |
| Model | ProSecurity K20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1442 MB |
