Ultimate Speed UMK 10 D3 handleiding
Handleiding
Je bekijkt pagina 18 van 105
18
GB/CY
Remove the defective 10 A glass fuse
15
.
Put the spring
14
(if it has been removed) back into the 12 V cigarette lighter
plug
7
. Then insert a new 10 A glass fuse of equal value.
Now insert the contact pin
16
into the fuse screw plug
17
and screw the fuse
screw plug
17
back onto the 12 V cigarette lighter plug
7
.
z Switch on lighting
Light mode
To switch on the LED light
3
press the LED switch
9
-
CAUTION! Do not look directly at the LED light
3
as this can damage
youreyes.
z Troubleshooting
= problem
= cause
= remedy
No reaction when pressing the On/Off switch
10
and the LED switch
9
.
There is no power supply to the device.
Make sure that the device is properly connected to the cigarette lighter socket
of the vehicle.
z Cleaning
ATTENTION: The device must not come into contact with water
or be placed in water. There is a risk of injury due to electric shock
if moisture enters the device.
Do not use cleaners or solvents. These could damage the device beyond
repair.
Keep the housing and device accessories clean.
Use a damp cloth or a soft brush to clean the device and the accessories.
z Storage
Keep the device in a dry location and out of the reach of children.
To avoid damage, take care to ensure that the compressed air hose
8
does
not become kinked.
Bekijk gratis de handleiding van Ultimate Speed UMK 10 D3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ultimate Speed |
| Model | UMK 10 D3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7695 MB |
