Ultimate Speed UMAP 12000 D4 handleiding
Handleiding
Je bekijkt pagina 17 van 281
GB/IE/NI/CY/MT
17
z Charge portable jump starter with
power bank
Connect the USB-C cable
16
with the charging port (USB-C)
4
and an appropriate USB-A socket or an appropriate USB
network adapter (working output voltage U
out,max
5 V ).
PLEASE NOTE: USB AC adapter not included in the scope
of delivery.
PLEASE NOTE: An undervoltage protection circuit is
installed in the portable jump starter with power bank
1
to
protect the device from damage. This prevents a deep discharge
of the portable jump starter with power bank
1
and automati-
cally switches the device off once the rechargeable battery pack
is fully discharged. Shortly before the undervoltage protection
circuit is activated, the last blue indicator light
8
will start to
flash. As soon as the undervoltage protection circuit is activated,
the last blue indicator light
8
flashes and power will no longer
be delivered. Please charge the portable jump starter with power
bank
1
again.
z Using the jumpstart feature
Step LEDs Meaning / Error Solution
1. Connect the
jump lead
10
of
the portable jump
starter with
power bank
1
to
the jumpstart
outlet
9
of the
portable jump
starter with
power bank
1
.
Red Error LED
13
on
the jump lead
10
is
permanently lit. A
short alarm will
sound once a
second.
The voltage
determined in the
portable jump
starter with power
bank
1
is not
enough to start the
car.
Charge the
portable
jump starter
with power
bank
1
.
Green Start LED
12
flashes.
The portable jump
starter with power
bank
1
is ready.
Carry on
with step 2
Bekijk gratis de handleiding van Ultimate Speed UMAP 12000 D4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ultimate Speed |
| Model | UMAP 12000 D4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19601 MB |
