Ultimate Speed UAWSB 2 C2 handleiding
Handleiding
Je bekijkt pagina 10 van 64
10 GB/IE/NI
LED status the electrical voltage in 6 Volt
operating mode is approximately 6�7 Volt or
7�3 Volt and in 12 Volt operating mode it is
approximately 13�2 Volt or 14�5 Volt�
If the “Overvoltage/controller defect” LED
lights up, then the alternator or voltage
regulator is defective� In this LED status the
electrical voltage in 6 Volt operating mode
is approximately 7�8 Volt and in 12 Volt
operating mode it is approximately
15�5 Volt� In this case contact your motor
vehicle garage�
z Cleaning
Danger of electric shock:
Always disconnect the connection to the
battery, before you clean the device�
Under no circumstances should you
immerse the device in water or hold it
under running water�
Attention: Possible material
damage: Do not use any aggressive or
abrasive detergents, as these could
corrode the surface of the housing�
Clean the outside of the housing with a
slightly damp cloth�
z Information about recycling
and disposal
Don’t throw away – recycle!
Please return this device, accessories
and packaging to your local recycling
depot� Do not dispose of the battery &
alternator tester in household waste, in fi re or
in water� Devices that are no longer functional
should be recycled wherever possible� Ask
your local stockist for advice�
Please note the marking on the different
packaging materials and separate
Bekijk gratis de handleiding van Ultimate Speed UAWSB 2 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ultimate Speed |
| Model | UAWSB 2 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3914 MB |
