Ufesa Nuuk+ handleiding

74 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 18 van 74
18
• If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent or
similarly qualied persons in order to avoid a ha-
zard.
• It is necessary to disconnect the appliance be-
fore assembling, disassembling and cleaning.
• This appliance is designed for use at a maxi-
mum altitude up to 2000m above sea level.
IMPORTANT INFORMATION
This appliance is intended exclusively for domestic use for the ventilation of rooms. Do
not use it for other purposes. Any other use should be considered improper and dan-
gerous. The manufacturer shall not be held responsible for any damage resulting from
improper, incorrect and irresponsible use and/or for repairs made by unqualied techni-
cians. Do not insert your ngers or any other objects through the fan’s protector grille.
The appliance must be kept out of the reach of children.
Do not use the appliance if it is not working properly, or if it appears to be damaged. If in
doubt, take it to a professional, qualied technician.
Do not move the appliance while it is operating.
When the appliance is not being used, remove the plug from the mains socket. Do not
touch the appliance with wet hands or feet.
Do not drag the appliance by the cable to move it.
Do not pull the cable or the appliance itself to remove the plug from the mains socket.
To clean the appliance, follow the instructions in the manual in the section dedicated to
cleaning and maintenance.
B&B TRENDS, S.L. will not be held liable for any harm or damage which may occur to
people, animals or objects as a result of failure to observe the aforementioned warnings.
INSTALLATION
1. The appliance can be operated with the control panel or the remote control. The remo-
te control has the same buttons as the control panel.
2. Insert the plug into the socket. A beep sound will be heard and the power icon “ON/
STANDBY” (d) will light on the display.
3. Press the button “ON/ STANDBY” (d) on the appliance. The appliance defaults to the
low fan speed and Normal Wind mode. Press it again to turn o the appliance (before
pressing the on/o button, please ensure the air outlet on the front is open)
4. Press the “Speed button” (b) under normal wind mode to select the fan speed. There
are 3 speeds Low-Medium-High for choice. They are indicated by the corresponding in-
dicators on the display panel:

Bekijk gratis de handleiding van Ufesa Nuuk+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkUfesa
ModelNuuk+
CategorieAirco
TaalNederlands
Grootte6967 MB