Handleiding
Je bekijkt pagina 16 van 56
16
use. Do not use the device or connect and disconnect to the supply mains with the
hands and / or feet wet. In order to ensure the sealing eect of blending blade, please
do not allow the blending blade to work without load. Do not pull on the connection
cord in order to unplug it or use it as a handle Unplug the product immediately from
the mains in the event of any breakdown or damage and contact an ocial technical
support service. In order to prevent any risk of danger, do not open the device. Only
qualied technical personnel from the brand´s Ocial technical support service may
carry out repairs or procedures on the device. Only for indoor use. Product has a ther-
mal safety component that operates in case of abnormal higher temperatures. In case
of operation of this component, it is needed to unplug the product from mains and let
cool for at least 15min.
B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals
or objects, for the non-observance of these warnings.
BEFORE USE
1. Thoroughly clean the parts that come into contact with food before you use the
appliance for the rst time.
2. Let hot ingredients cool down before you process them (max. temperature 60°C).
3. Cut large ingredients into pieces of approximately 2 cm before you process them.
4. Assemble the appliance properly before you put the plug in the wall socket.
INSTRUCTIONS FOR USE
USE OF THE HAND BLENDER
The hand blender is intended for blending liquids (e.g. dairy products, sauces, fruit jui-
ces, soups, mixed drinks and shakes), mixing soft ingredients, and pureeing cooked in-
gredients (e.g. for making baby food)
1. Attach the blender blade to the motor unit. It will “click” into place.
2. Immerse the blade guard completely in the ingredients.
3. Press the speed button (I) or turbo speed button (Turbo) to switch on the appliance.
4. Move the appliance slowly up and down and in circles to blend the ingredient.
The appliance has variable speed control function showed on unit top, please refer to
Fig.1. Turn the speed control clockwise to increase the power or counterclockwise to
decrease the power.
USE OF THE CHOPPER
The chopper is intended for chopping ingredients such as nuts, meat, onions, hard chee-
se, boiled eggs, garlic, herbs, dry bread etc.
The blades are very sharp! So be very careful when handling the blade unit. Be especially
careful when you remove the blade unit from the chopper bowl, when you empty the
chopper bowl and during cleaning.
1. Attach the chopper blade unit in the chopper bowl.
2. Add the ingredients in the chopper bowl.
3. Fix the coupling unit onto the chopper bowl.
4. Insert the motor unit onto the chopper bowl.
5. Press the speed button (I) or turbo speed button (Turbo) to switch on the appliance.
If the ingredients are sticked to the wall of the chopper bowl, loosen them by adding
liquid or using a spatula. Always let the appliance cool down after chopping meat.
Bekijk gratis de handleiding van Ufesa LCD Jupiter Max, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ufesa |
| Model | LCD Jupiter Max |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 4545 MB |
