Handleiding
Je bekijkt pagina 20 van 64
20
water or other liquids. The ratio of food to water is 2:3. The total amount of mixture
cannot exceed the maximum mark on the glass jar.
Attention: Please do not add HOT water to the jar and do not operate the applian-
ce without liquid.
3. Cover the lid and ensure that the measuring cup is properly attached.
4. Plug the power cord into a standard wall mounted power outlet.
5. Select the menu button suitable for the desired mixing task. Press the “Start/Stop”
button to start processing ingredients.
6. For fast or fragile mixing tasks, please press the “P” button and hold for a few se-
conds, then release and operate several times until you achieve the desired eect. If
you want to add food while the jar is working, please open the measuring cup and put
the food into it through the feeding port on the lid. (See Fig.4)
Note: For each use, the continuous operation time should not exceed 2 minutes,
and at least 10 minutes rest time must be maintained between two consecutive
cycles. Please let the unit cool to room temperature before performing next ope-
ration cycle.
When the desired eect is achieved, press the “Start/Pause” button to stop the appliance.
Attention:
1) Please ensure that the product has cooled to room temperature before the next
operation cycle begins.
2) If you want to stop the appliance while it is running, please press the “Start/Pause”
button.
Important operating tips
1. For best circulation of food that is to be blended with some liquid, pour the liquid
into the jar rst, then add solids.
2. Some of the tasks that cannot be performed eciently with a blender are: beating
egg whites, whipping cream, mashing potatoes, grinding meat, mixing dough, extrac-
ting juice from fruit and vegetables
3. The following items should never be placed in the unit as they may cause damage:
bones, large pieces of solid, frozen food, or tough foods.
MAINTENANCE AND CLEANING
This product contains no user serviceable parts. Refer service to qualied service per-
sonnel.
1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Don’t let food dry on the jar
assembly as this will make cleaning dicult.
3. Pour a little warm soapy water into the jar and press the “P” button for a few seconds.
And then empty the jar.
4. Disassemble all detachable parts, remove the jar assembly from the main unit. The
jar holder can also be disassembled and it must be cleaned together with the jar.
5. Rinse the measuring cup, lid, seal ring, and jar and blade assembly by hand or in a
dishwasher and then dry. They are dishwasher safe components, but the temperature
setting must not exceed 60℃.
6. Brush the blade using warm soapy water, then rinse thoroughly under the tap. Don’t
touch the sharp blades, handle them carefully. Don’t immerse the blade assembly in
water. Leave to dry upside down away from children.
7. Wipe the motor unit surface with a damp cloth and dry thoroughly. Remove the stub-
Bekijk gratis de handleiding van Ufesa Citrine, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ufesa |
| Model | Citrine |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 5688 MB |
