Ubiquiti Networks CRM Point handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 7 van 24

Software Installation

The CRM Control software is pre-installed on the

CRMPoint. To access it, follow these steps:

1. Ensure that your host system has an Internet

connection and is on the same Layer-2 network

as the CRMPoint.

2. The CRM Point is set to DHCP by default, so it

will try to automatically obtain an IP address.

Assign a specific IP address to the CRM Point, or

check the DHCP server to see which IP address

was assigned to it.

You can also discover the CRM Point using the

Ubiquiti® Device Discovery Tool, available at

https://www.ubnt.com/download/utilities

3. Launch a web browser. In the address field,

type http: followed by the IP address of the

CRMPoint. Press enter (PC) or return (Mac).

http://<IP_address>

4. If this is your first time using the CRMPoint,

proceed to step 5.

If you have previously logged into the

CRMPoint, proceed to step 7.

5. The CRM Point user interface will appear and

begin upgrading the device software to the

latest version.

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Ubiquiti Networks CRM Point, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd