TVLogic LXM-240U handleiding

65 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 65
01 CAUTION
10
4K/UHD 12G-Quad Multi View Monitor
VESA WALL MOUNTING : LXM-320P / LXM-550U
< LXM-320P Guide about VESA Mounting Screws >
- When mounting on the wall bracket, x the monitor using 4 pieces of M8.0 x 15mm screws.
- Use the 400mm x 200mm VESA MOUNTING tap holes on the rear housing.
< LXM-550U Guide about VESA Mounting Screws >
- When mounting on the wall bracket, x the monitor using 4 pieces of M8.0 x 15mm screws.
- Use the 400mm x 400mm VESA MOUNTING tap holes on the rear housing.
Do not install the monitor anywhere other than a vertical wall.
Do not install the monitor in a place subject to vibration or impact. The product may fall and
be damaged.
Do not install the monitor next to a sprinkler detector, as it may sense the heat from the
monitor and get activated.
Do not install the monitor near high-voltage cables. The product may be interfered with by
high-voltage cables and the screen may not display properly.
Do not install the monitor near heating devices, as this may cause the product to overheat and
malfunction.
Check the stability of the wall.
If the wall is weak, reinforce the wall before installation.
Do not drill into the wall and install the monitor inside.
Before installing the wall mount, be sure to connect the signal cables and the power cord to
the monitor.
If it is not a cement wall, contact a professional company to check whether installation is
possible before installing.
Do not install the monitor tilted more than 15 degrees.
Using screws longer than the standard length may damage the internal components of the
monitor.
Do not attach the wall bracket with excessive force. The product may be damaged or fall and
cause injury.
Vidente is not responsible for any damage to the monitor or injury resulting from using
inappropriate screws or attaching the wall bracket with excessive force.
To mount the monitor on the wall, you must use a wall bracket that can be installed more than
10cm away from the wall and have the payload below.
(LXM-320P: over 25kg / LXM-550U: over 40kg)
To install the monitor using a wall mount bracket, remove the stand from the monitor.
Do not install the wall bracket while the monitor is turned on. It may result in injury from
electric shock.
Precautions about Mounting on the Wall

Bekijk gratis de handleiding van TVLogic LXM-240U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkTVLogic
ModelLXM-240U
CategorieMonitor
TaalNederlands
Grootte14666 MB