TV One C2-6204 handleiding
Handleiding
Je bekijkt pagina 31 van 73
MNL- C2-6204-V3.00 29
Adjust tally menu item
This menu only appears when a unit has an optional Tally / UMD module installed inside it.
The Tally / UMD module allows the unit to respond to Tally / GPIO inputs in certain ways (see below) and
also allows under-monitor display (UMD) packets to be received (using the TSL 3.1 protocol) and overwrite
the source label text automatically.
The UMD support menu item (‘UMD display address’) is listed under the ‘Adjust sources’ menu section.
Tally / GPIO connections are connected via a D25 socket:
13
12
11
10
9
8
7
6
5
4
3
2
1
5v
TX+
RX+
GND
TI8
TI7
TI6
TI5
TI4
TI3
TI2
TI1
GND
TX-
RX-
GND
TO8
TO7
TO6
TO5
TO4
TO3
TO2
TO1
GND
25
24
23
22
21
20
19
18
17
16
15
14
Note that the TX+/- and RX+/- pins are duplicates of the RJ45 connector and support RS-422/485, as per
the TSL specification.
The RJ-45 connection is as shown below (as viewed from the rear):
Pin
Function
Direction
1
0v
GND
2
0v
GND
3
TX-
OUT
4
RX+
IN
5
RX-
IN
6
TX+
OUT
7
No connection
In all cases, the Tally output bits match the Tally input bits – e.g. when TI3 is pulled low externally, the TO3
pulls low to match it. This allows daisy-chaining of units together.
Bekijk gratis de handleiding van TV One C2-6204, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TV One |
| Model | C2-6204 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7375 MB |