TV One C2-6204 handleiding
Handleiding
Je bekijkt pagina 22 van 73
20 tvONE
Source labeling with the adjust sources menu
The ‘Adjust Sources’ menu group accesses the parameters associated with each input present on your
unit. Parameters relating to the video signal are detailed in a later section – this section solely relates to
the source labelling function.
It is recommended that you Store your settings once you’re happy with them in readiness for future use.
This menu item selects the input connection for which you want to make adjustments to. As in the image
above, changes will only be made to the source connected to DVI-I1. Once the selection has been made,
all changes made using the following operating parameters will only apply to the selected input.
Tally / UMD module support
If a Tally / UMD module is installed, then an extra menu item will appear:
This menu item allows each video source to receive a UMD (under-monitor display) text string and use
that as the source’s label.
To do so, each source must have its own identifying display address number – and the UMD data source
must use the same number when sending the data packet. When a UMD packet is received that has this
display address, the text received in that packet overwrites the existing source label.
See ‘Adjust tally’ for wiring connections on the Tally / UMD module.
Source labeling
This menu item controls where the source label will appear within the window that uses this source.
H position options: Off, Left, Center, Right
V position options: Off, Top, Middle, Bottom
When either of the options are set to ‘Off’, no source labelling will be shown.
In this menu item, you can change the text shown when this source is used. Once you’ve pressed the
menu SELECT button, you can use the up/down buttons to change the text character, and the left/right
buttons to change which character is being adjusted.
If you are showing this source on-screen, then any changes you make are immediately shown there. The
character font on the output display will in general match that of the LCD screen, but be of a higher
quality.
Source: DVI-I1
Source to adj [DVI-I1]
Source: DVI-I1
UMD display address [0]
Source: DVI-I1
Lbl HVpos [Center] [Bottom]
Label char [ 1] ( 068)
DVI-I1
Source: DVI-I1
Lbl for/bck col [Wht] [TrB]
Bekijk gratis de handleiding van TV One C2-6204, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TV One |
| Model | C2-6204 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7375 MB |