TV One C2-6204 handleiding
Handleiding
Je bekijkt pagina 11 van 73
MNL- C2-6204-V3.00 9
Menu names and descriptions
Menu Name
Description
Adjust outputs
Controls output parameters
Adjust windows
Controls characteristics of the pip windows
Adjust keyers
Controls the keying ability of the unit
Adjust borders
Controls window border parameters
Adjust sources
Controls signal source input parameters
Adjust transitions
Controls the method of transition when switching inputs
Adjust tally
Controls optional Tally board functions
Adjust Ethernet
Controls IP addresses and network parameters
Adjust resolutions
Controls unit’s input/output resolution table
System
Controls global system parameters for the unit
The adjust outputs menu
This menu group allows adjustments to be made that specifically affect the output of the unit, including
output resolution and locking/overlaying onto a computer or video source.
This menu item allows the lock mode to be selected and the lock source to be defined. The top line of the
display shows the current detected resolution of the selected lock source (RGB1 in this example). The lock
mode can be either Off, Genlock or Lock & Mix, with the operation of these shown in the following table:
Lock mode
Description
Off
The output resolution of the Output is defined by the setting for Output Resolution
and there will be no background source visible.
Genlock
The output video will be “Genlocked” to the selected lock source. The output signal
will be synchronous to the input sync and adjustable but there will still be no lock
source visible.
Lock & Mix
The output video will be locked to the selected source, the syncs will be locked (but
with an additional internal video processing delay) and the background for the
output will be that of the Lock source (unless foreground and background are
swapped).
Frm.lock*
The frame rate of the output will be locked to the frame rate of the input. This can
only work if the output resolution frame rate matches that of the lock source
frame rate. ‘Frm.lock’ will flash until a highly stable lock has been achieved.
*Only certain models support this.
In both Genlock and Lock & Mix modes the source selected for the lock input determines the resolution of
the output image. The output resolution for the entire image can be no different than the resolution of
the lock source. All synchronization signals are re-generated within the unit so they may look slightly
different when compared on an oscilloscope to the original source.
800 x 600 60Hz
Lock mode [Off] [RGB1]
Bekijk gratis de handleiding van TV One C2-6204, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TV One |
| Model | C2-6204 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7375 MB |