Handleiding
Je bekijkt pagina 5 van 24
support@turbro.com www.turbro.com
02
● This product should be plugged directly into a power outlet. Power outlets should be properly rated,
protected, and sized in order to avoid electrical overload. Do not use a multiple-outlet power strip or
extension cord. Failure to do so may result in short-circuit or electrical shock.
● Do not use an AC plug adapter with this appliance.
● Do not cut or remove the third (ground) prong from the power cord.
● Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend
to use is not adequately grounded or not protected by a time-delay fuse or circuit breaker, have a qualified
electrician install the proper wall power receptacle before using this appliance.
● Be sure that the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding
is important. The power cord is equipped with a three prong grounding plug for protection against shock
hazards.
● Do not cover the power cord with a rug or carpeting.
● Do not rest hot or heavy objects on the appliance and power cord.
● If the power cable is damaged, it must be replaced by the manufacturer or an authorized technical service
center in order to avoid all risk.
● Do not damage, alter, excessively bend, twist, pull or heat the power cord.
● Do not run the air conditioner without the white plastic shell in place. This could result in mechanical damage
within the air conditioner.
● During the installing or moving the appliance, be careful not to pinch, crush, or damage the power cord.
● Always unplug the unit from the outlet before cleaning or maintenance operations.
Power Cord Operation (LCDI Plug)
The power cord used with this air conditioner contains a current detection device designed to reduce the risk
of fire. Always finish the test of the LCDI (Leakage Current Detection and Interruption) plug before use:
1. Plug in the Air Conditioner.
2. The power supply cord head has two buttons, a TEST button and a RESET button. Press the TEST button
and notice a click as the RESET button pops out.
3. Press the RESET button. Once again notice a click as the button engages.
4. The power supply cord will now supply electricity to the unit.
Bekijk gratis de handleiding van TURBRO Finnmark FM05K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TURBRO |
| Model | Finnmark FM05K |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2358 MB |