Turbosound Manchester MC15-R handleiding
Handleiding
Je bekijkt pagina 7 van 19
12 MANCHESTER MC15-R Quick Start Guide 13
Connecting an MC15-FB y bar to an MC15-R
The details below show how to attach an MC15-FB y bar to an MC15-R speaker, using the MC15-RS rigging set.
WARNING: Only the MC15-RS rigging set shall be used for this assembly. No other method or equipment shall be used.
I-Bar
Single QRP hole
I-Bar
1. For a single row array, orient the MC15-R with the horn at the top, and the
woofer at the bottom.
2. For a two-high array, invert the top MC15-R, so the woofer is at the top,
and the horn at the bottom. The two MC15-R speakers are Horn-to-Horn.
1 x 1
Horn
Woofer
Horn
Horn
Woofer
Woofer
2 x 1
3. Make sure the MC15-R is oriented the desired way up, either horn-up for a
single row array, or woofer up for a two-high array.
4. Fit the MC15-FB y bar onto the top of the MC15-R, and make sure it is
aligned correctly, with no gap between them. The bottom of the y bar
has three recesses which help to align with the three feet in the top of
the MC15-R.
5. Fit a single-lock to the end of each I-Bar which
has a single hole. Make sure the quick release
pins are correctly inserted all the way into the
holes in the I-Bars, and are securely in place.
6. Slide the two I-Bars into the I-channels formed
at the top of the MC15-R and the bottom of
the MC15-FB, and so they securely join them
together. The ends of the I-Bars which have four
holes go in rst.
7. Fit a single-lock to each I-Bar at the rear of the
speaker, and make sure they are tted to the
fourth hole from the end of the I-Bar. Make sure
that the quick release pins are correctly inserted
all the way into the holes in the I-Bars, and are
securely in place.
The three extra holes in the I-Bars can be used for
storage of unused single and double-locks.
Note that only the single-locks are used to secure
the MC15-FB to the MC15-R.
WARNING: Double-check that both I-Bars
are correctly inserted between the MC15-FB
y bar and the MC15-R speaker, securely joining them
together, with no gap between them.
Double-check that there is a single-lock securely tted
to the front of each I-Bar, and another single-lock is
securely tted at the rear of each I-Bar, in the fourth
hole from the end of the I-Bar.
Failure to follow these instructions may lead to an
I-Bar falling out, and failure of the MC15-FB and
MC15-R assembly, with the possibility of death or
permanent injury.
Single lock / QRP
Single lock / QRP
Single lock / QRP
Recesses
Bekijk gratis de handleiding van Turbosound Manchester MC15-R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Turbosound |
| Model | Manchester MC15-R |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 8682 MB |
