Handleiding
Je bekijkt pagina 14 van 24
14
OPERATING INSTRUCTIONS
Level and set your merchandiser in place. Connect all necessary electrical connections.
Your Open Display Merchandiser should now be ready for use.
POWER SWITCH:
Located at the bottom of front panel, colored in red.
LIGHT SWITCH:
Located at the bottom of front panel, colored in green.
TEMPERATURE CONTROL:
Located at the bottom of front panal,
THERMOMETER:
(TOM-36DX, TOM-36E, TOM-40, TOM-48DX, TOM-48E,TOM-50, TOM-60DX, TOM-60E, TOM-72DX,
TOM-72E, TOM-96DX, TOM-96E)
Thermometer showing temperature is located on the left side of the back panel .
(TOM-40M, TOM-50M, )
Thermometer showing temperature is located on the right side of the back panel .
PRODUCT PLACEMENT:
Overloading of product or placing products against the back wall or suction grill may cause.
disruption in air flow, which may cause the unit to not cool properly.
NOTE:
• Do not place products into your merchandiser until the desired temperature is reached.
• Do not place hot products into the merchandiser.
H
OW TO SET THE TEMPERATURE
1.
Press the SET button for 1S to check the temperature setting.
2. The display panel shows the current temperature setting.
3.
To change the temperature, press the UP or DOWN button and press the SET
button when adjustment is complete.
4.
The temperature setting has been changed and the display panel shows the current
temperature.
M
ANUAL DEFROST
1.
Press the DEFROST button for 3S to begin a manual defrost.
2.
Defrost mode will be off automatically when it is complete
3.
During the defrosting process, pressing the DEFROST button for 3S will stop
defrosting and turn off the defrost mode.
Bekijk gratis de handleiding van Turbo Air TOM-48DXB-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Turbo Air |
| Model | TOM-48DXB-N |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2109 MB |
