Turbo Air STX130MR448A3 handleiding
Handleiding
Je bekijkt pagina 15 van 33
15
Manual defrost
Press DOWN for more than 3 s (activated only if the temperature conditions are right).
Continuous cycle
Press UP+DOWN for more than 3 s (activated only if the temperature conditions are right and
for easy split only when H6=0).
The continuous cycle is used to maintain refrigeration active in the cabinet or cold room,
regardless of the temperature inside the unit. This may be useful for rapidly bringing the
temperature below the set point value.
Rapid display of the temperature read by the other probes
Press the DOWN button to scroll the temperatures read by the probes. Each time the DOWN
button is pressed, the display will show the name of the probe Pr1, Pr2 or Pr3 (only on the
models with 3 inputs and with multifunction input configured as a probe) and after 1 s the
temperature measured by the selected probe will be displayed.
To display the other probes, press DOWN again.
To return to the normal display, wait 3 s without pressing any buttons (exit by timeout).
Bekijk gratis de handleiding van Turbo Air STX130MR448A3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Turbo Air |
| Model | STX130MR448A3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2961 MB |
