Turbo Air LED036BE handleiding
Handleiding
Je bekijkt pagina 19 van 26
19
Unit Cooler troubleshooting.
Symptoms Possible causes Solution
Cooling is
insufficient.
(Room
temperature too
high.)
Insufficient refrigerant Add refrigerant
Too much oil in unit cooler
Check the easy oil return in
suction line.
Superheat too high Adjust expansion valve.
Room thermostat set too high Adjust thermostat
Coil iced-up
Manually defrost coil. Check
defrost time, period, controls.
Defective distributor Replace.
Uneven coil
frosting.
Defective distributor Replace
Defective heater Replace
Defrost termination set too low
Adjust defrost termination setting
higher and move defrost
thermostat.
Ice build up in
coil quickly
Fin spaced too narrow Replace coil
Evaporating temperature too low Adjust expansion valve
Decrease of air volume Check fan and clean air filter
Unit cooler capacity is too small Replace unit cooler
Fan not
operating
Main switch open Close switch
Blown fuses
Replace fuses. Check for short
circuits or overload conditions
Defective motor Replace motor
Defective timer or defrost
thermostat
Replace defective component
Unit in defrost cycle Wait for completion of cycle
Coil does not get cold enough to
reset thermostat.
Adjust fan delay setting of
thermostat.
Ice accumulating
in drain panel
Defective heater Replace heater
Drain line plugged Clean drain line
Defective drain line heater Replace heater
Defective timer or defrost
thermostat
Replace defective component.
Bekijk gratis de handleiding van Turbo Air LED036BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Turbo Air |
| Model | LED036BE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2377 MB |
