Tudor M07643 handleiding
Handleiding
Je bekijkt pagina 20 van 24
7.2 Chargers
Use the charger provided with the tool only to charge the battery
Never attempt to charge non-rechargeable batteries.
Have defective cords replaced immediately.
Do not expose to water.
Do not open the charger.
Do not probe the charger.
The charger is intended for indoor use only.
8 OPERATION
Always disconnect the battery pack from the angle grinder before making
any adjustment or attaching any accessories.
8.1 Fitting the auxiliary handle
The auxiliary handle (6) can be attached to the angle grinder in 2 different positions: left and
right.
8.2 Assembly the protective guard
1. Loosen the clip of the protective guard (7) by pulling lock lever of protective guard (1)
outward.
2. Turn the protective guard so that uncovered part of the disc is as far apart as possible from
the hand on main handle (3).
3. Fix the protection guard by pushing the lock lever inwards (the protective guard should no
longer be able to move).
NOTE: If the protective guard can not be fixed firmly by the lock lever (1), use a hexagon
wrench to tighten the hexagon nut.
8.3 Replacing the grinding disc
Beware – a disc which has been used may be very hot!
Depress and hold down the spindle lock button (2) to secure the spindle.
Turn the shaft until it locks.
Remove the outer flange (a) and backing flange (b) by using the two-hole spanner
provided.
Fit the desired disc (8) on the spindle and replace the outer flange and backing flange.
Release the spindle lock.
Important! Only ever press the spindle lock when the motor and grinding
spindle are at a standstill!
You must keep the spindle lock pressed while you change the wheel !
For grinding wheels up to approx. 3 mm thick, screw on the flange nut with the flat side facing
the grinding wheel.
8.4 Switching on / off
Before engage the ON/OFF switch button, check that the grinding disc is
properly fitted and run smoothly, the outer flange is well tightened.
Connect the battery pack onto the angle grinder body.
Bekijk gratis de handleiding van Tudor M07643, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tudor |
| Model | M07643 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2649 MB |
