Tudor M07245 handleiding
Handleiding
Je bekijkt pagina 16 van 20
EN
Do not treat the surface to be worked with solvent-containing fluids. Materials being
warmed up by the scraping can cause toxic vapours to develop.
Exercise extreme caution when handling the shovel blade. The accessory is very sharp;
danger of injury.
7 ASSEMBLY
WARNING: Always check that the power supply corresponds to the voltage
on the rating name plate. Remove the power tool from the packaging. Do
not plug it into the electrical grid before assembly.
Wear protective gloves when changing application tools/accessories.
Contact with the application tool/accessoriy can lead to injuries.
7.1.1 Selecting the Application Tool/Accessory
Accessory
Material
Plunge cut saw blade wood
Wooden materials, plastic,
gypsum and other soft materials.
Shovel blade
Wood, paint, carpet adhesive,
silicone and other elastic
materials.
Base plate for sanding
Depends on sandpaper
7.1.2 Mounting/Replacing the Application Tool/ Accessory (Fig. 1)
If required, remove an already mounted application tool/accessory.
For removing the application tool/accessory, loosen the screw with the Allen key and
remove the application tool/accessory.
Mount the requested application tool/accessory in such a manner on the tool holder that
the offset faces downward.
Turn the application tool/accessory to a position favourable for the respective job, and
allow it to engage into the cams of the tool holder.
Fasten the application tool/accessory with the bolt. Tighten the bolt with Allen key until the
spring washer of the bolt faces flush against the application tool/accessory.
Bekijk gratis de handleiding van Tudor M07245, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tudor |
| Model | M07245 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2330 MB |
