Tryton TJKU30 handleiding
Handleiding
Je bekijkt pagina 7 van 56
7
battery first top the empty state and remove from the electric tool. Hand over to
an organization that deals with utilization of batteries or take it back to the
shop where the tool had been purchased.
Using the charger:
a) Use only dedicated power adapters to charge the battery.
Application of a power adapter dedicated to charge another type of the
battery unit poses a risk of fires.
b) Do not disassemble the charger.
c) The charger is designed exclusively for indoor use. It must not be
exposed to water or moisture.
d) Charge only in an ambient temperature between 15-25
degrees.
e) Do not insert metal objects of any kind into the charger.
INTENDED USE AND DESCRIPTION:
A cordless impact wrench is a compact tool for tightening and loosening
threaded connections with 1/2” (13 mm) impact sockets inserted onto the
anvil. It is most useful when changing car wheels, installing or removing
parts attached with bolts, repairing garden machinery etc.
You can use suitable adapters or universal connectors between the anvil and
the socket.
ATTENTION! Use the tool and its equipment for their intended purpose and as
instructed by the manufacturer. Do not use the tool for any other purpose.
Do not use the tool as a hammer to remove or straighten cross-shaped
fittings. Never try to adapt the tool for other uses or modify it.
Remember that the tool is not intended for professional, workshop, or
industrial use. If the device is used in professional workshops, industrial
plants or similar facilities, the warranty is void.
Any use of the that is not in observance with the above-mentioned device
purpose is forbidden, leads to the loss of warranty, and relieves the
manufacturer from responsibility for the resulting damage.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the surroundings.
The intended use includes conformity with safety, installation, and
operating instructions in the manual. Additionally, follow accident
prevention (OSH) regulations as closely as possible.
Application of the tool in accordance with the intended use also refers to its
maintenance, storage, transportation and repairs.
Defective electric tools can be handed over for repairs exclusively to service
workshops appointed by the tool manufacturer.
Despite using the tool according to its intended application it is impossible
to eliminate certain residual risk factors. Considering the tool construction
the following risks may occur when operating the tool:
- Possible injury by ejected parts;
- Damage of hearing when appropriate hearing protectors are not used.
n The set includes:
ź Cordless impact wrench -1pc.
ź Impact sockets – 4 pcs. (17mm, 19mm, 21mm, 23mm)
ź 1pc.Operating instruction -
ź Warranty card - 1 pc.
n Device components (see pages 2-3):
Fig.A 1. Impact socket
2. Anvil 1/2"
3. Rotation direction switch
4. Handle
5. Fastener to hang on the belt
6. Battery*
7. Battery lock clip*
8. Control panel/Gear shifter
9. On/off switch
10. Auxiliary lighting
Fig.C 11. Charger*
12. Adapter*
13. Battery level indicator button*
14. Battery indicator to show the battery status of charge*
* The accessories shown or described are not standard equipment. For
the complete offer of auxiliary equipment, see our catalogue.
TECHNICAL PARAMETERS:
The vibration level value given refers to basic application of the tool. If the
tool is used for other applications or with other tools, or if it is not
maintained properly, the vibration level may differ from the values given.
The above-mentioned causes may lead to higher exposure to vibrations
during the whole work time.
One must implement additional safety measures to protect the operators
from exposure to vibrations, such as maintenance of the electric tool and
work tools, assurance of proper hand temperature, or determination of the
sequence of work operations.
The declared total vibrations and declared noise emissions were measured
in accordance with a standard test method and may be used for tool
comparison.
The declared total vibrations and noise emissions can be used in preliminary
exposure assessment.
Warnings:
The vibrations and noise emissions during the actual use of the power tool
may differ from the declared values depending on how the tool is used and
on the type of the workpiece in particular.
Determine safeguards to protect the operator. They should be based on the
estimated exposure under actual operational conditions (taking into
account all parts of the operating cycle such as when the tool is switched off
or idle except the start time).
PREPARATION FOR WORK:
Prior to each use of the tool one has to check whether moving parts of the
device are in operating conditions, not seized, cracked or damaged that may
affect proper operation of the tool. Damaged tools must be handed over for
repairs before they can be used again.
Recommended 20 V Li-ion batteries: TJ15AK (1,5Ah), TJ2AK (2Ah), TJ4AK (4Ah)
Recommend chargers: TJ3LD(3-5h), TJ1LD (1h)
Rotation speed under no-load conditions
Supply voltage
Anvil size
Gear shifter I-II-III
Maximum torque
Acoustic pressure level(LpA)
Acoustic power (LwA)
Vibration level according to EN 62841,
maximum tightening torque a
h
Weight (with battery)
(Tolerance of measurements K=1,5 m/s²)
n =0-2300/min
o
20 V d.c.
yes
2
13,668 m/s
102,7 dB(A)
91,7 dB(A)
1,4 kg
1/2" (13mm)
350 Nm
Tolerance of measurements K K
LpA, LwA
3 dB(A)
Bekijk gratis de handleiding van Tryton TJKU30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tryton |
| Model | TJKU30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9975 MB |
