Handleiding
Je bekijkt pagina 15 van 20
TVM - TRUE VISUAL MERCHANDISER
TEC_TM_152 | REV. A | EN 09/23/2021 Page 15 of 20
www.truemfg.com
Maintenance, Care & Cleaning
Fig. 3. Never brush across the coil fins.
Fig. 1. Swing door louver grill screw location.
Fig. 2. Carefully remove the grill.
Fig. 4. Verify all blockages have been removed.
CAUTION - Take care during operation, maintenance or repairs
to avoid cuts or pinching from any cabinet part/component.
Condenser Coil Cleaning
When using electrical appliances, basic safety precautions should
be followed, including the following:
WARNING – Electrical shock or burn hazard.
Unplug the unit or turn off the power supply before
proceeding. DO NOT clean appliance with a pressure
washer or hose.
CAUTION – Risk of eye injury. Eye protection is
recommended.
CAUTION – Coil fins are sharp. Gloves are
recommended.
Required Tools
Required tools include (but may not be limited to) the following:
Procedure
1. Disconnect power to unit.
2. Remove the front louvered grill from the cabinet. See fig. 1 and 2.
3. With a stiff bristle brush, carefully clean accumulated dirt from
the front condenser coil fins See fig. 3.
4. With dirt removed from the surface of the coil, use a flashlight
to verify that you can see through the coil and observe the
condenser fan blade spinning. See fig. 4.
If the view is clear, reinstall louvered grill, connect unit to
power and verify operation.
If the view is still blocked with dirt, proceed to step 5.
5. Remove the condenser base bolts. See fig. 5.
6. Remove the condenser coil brackets (if applicable).
7. Carefully slide the condensing unit out (tubing connections are
flexible). See fig. 6. Gently blow compressed air or CO₂ through
the coil until it is clean.
8. Carefully vacuum any dirt around and behind the condensing
unit area.
9. Reinstall the coil brackets (if applicable). Then carefully slide the
compressor assembly back into position and bolt it in place.
See fig. 7.
10. Reinstall the louvered grill, connect power to the unit, and
verify operation.
• 1/4" nut driver
• 3/8" nut driver
• Stiff bristle brush
• Tank of compressed air
• Vacuum cleaner
• Flashlight
• Eye protection
• Gloves
Bekijk gratis de handleiding van True TVM-48SL-HC~VM01 BLK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | True |
| Model | TVM-48SL-HC~VM01 BLK |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5374 MB |
