Handleiding
Je bekijkt pagina 16 van 44
REFRIGERATED FOOD PREP truemfg.com
TEC_TM_090 | REV. F | EN
P#975530
01/14/2025 Page 16 of 44
Installation & Setup (cont.)
Procedure – Castors (TFP/TFT Models Only)
1. Position packing material behind the appliance and carefully
lay the appliance on its back.
2. Remove the castor box. See fig. 11.
NOTICE ›
Each appliance has one castor box that
completely encloses the castor. With a 1/4" hex-head driver,
disassemble the castor box. See fig. 12.
3. Install the desired number of shims. See previous page for
instructions.
4. Tighten and secure the shims and castor with optional castor
wrench.
5. Install the castor box.
6. Carefully raise the appliance to an upright position and verify
the level. If the appliance is not level, repeat the process until
the appliance is level and supported.
Fig. 11. Locate castor box. Back out the four screws anchoring the box.
Fig. 12. One castor box on each cabinet is fully enclosed.
Bekijk gratis de handleiding van True TFP-72-30M-D-2-HC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | True |
| Model | TFP-72-30M-D-2-HC |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 13865 MB |
