Handleiding
Je bekijkt pagina 14 van 44
REFRIGERATED FOOD PREP truemfg.com
TEC_TM_090 | REV. F | EN
P#975530
01/14/2025 Page 14 of 44
Installation & Setup (cont.)
Fig. 1. Leveling screw.
Fig. 2. Turn the leveling screws clockwise to lower the appliance.
Fig. 3. Turn the leveling screws counterclockwise to raise the appliance.
Required Tools
Required tools include (but may not be limited to) the following:
• Adjustable Wrench
Procedure – Leveling Screws
If leveling screws are not factory installed, then, with access to the
appliance bottom, install the leveling screws into the threaded
holes in the frame rail or appliance bottom. See figs. 1–3.
USER ACTION!
TUC-24 Models: Lower the front leveling legs so the
unit remains stationary when opening the door.
Leveling legs are provided to assist with leveling the appliance.
Adjustable legs provide 6" (152 mm) of clearance under the
appliance. Castors provide appliance mobility.
Leveling Screw, Leg, or Castor Installation
WARNING!
Tipping hazard! ALWAYS verify center leveling
screws fully contact the floor after leveling the
appliance.
ALWAYS be sure leveling legs or castors (and shims)
are snug against the rail assembly or mounting
plate.
ALWAYS verify center castors or leveling legs fully
contact the floor after leveling the appliance.
See fig. below.
Sharp edges! Take care when moving, installing,
cleaning, servicing and maintaining the appliance
to avoid cuts. Be sure to take care when reaching
under the appliance or handling metal components.
Bekijk gratis de handleiding van True TFP-72-30M-D-2-HC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | True |
| Model | TFP-72-30M-D-2-HC |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 13865 MB |
